How to Install Greenwave C4000LG DSL Modem

Here’s a step-by-step guide on how to install the Greenwave C4000LG DSL Modem Router:

  1. Unpack the modem and check the contents to ensure you have the modem, power adapter, Ethernet cable, and quick start guide.
  2. Connect the modem to your DSL line. Locate the DSL port on the back of the modem and connect one end of the included Ethernet cable to the port. Connect the other end of the cable to the DSL port on your wall.
  3. Connect the modem to a power source. Connect the power adapter to the modem and plug it into a wall outlet. The modem should power on automatically.
  4. Connect your computer to the modem. Connect one end of the included Ethernet cable to the LAN port on the back of the modem and the other end to the Ethernet port on your computer.
  5. Launch a web browser and type “http://192.168.1.1” into the address bar. This will bring up the Greenwave setup wizard.
  6. Follow the on-screen instructions to complete the setup process. The wizard will guide you through the setup process, including configuring the modem’s wireless network, setting up a password, and configuring the advanced settings.
  7. Test your internet connection. Once the setup process is complete, open a web browser and try accessing a website. If you are able to access the website, your modem and internet connection are working correctly.

Note: If you have any trouble setting up your modem, contact Greenwave customer support for assistance. They can help you troubleshoot any issues and ensure your modem is properly configured for your internet connection.

How to Reset Greenwave C4000LG DSL Modem

Here’s how to reset the Greenwave C4000LG DSL Modem:

  1. Locate the reset button. The reset button is usually located on the back of the modem and is usually a small button with a red or white dot in the center.
  2. Press and hold the reset button. Using a paperclip or similar object, press and hold the reset button for 10 seconds. The modem should power off and restart automatically.
  3. Wait for the modem to restart. Once the modem has restarted, it should be reset to its factory default settings.
  4. Log in to the modem. Once the modem has restarted, launch a web browser and type “http://192.168.1.1” into the address bar. This will bring up the Greenwave setup wizard.
  5. Follow the on-screen instructions. The setup wizard will guide you through the process of setting up your modem, including configuring the wireless network and password, and configuring the advanced settings.

Note: After resetting the modem, you may need to reconfigure any custom settings or reconfigure your internet connection with your ISP. If you have any trouble setting up your modem after resetting it, contact Greenwave customer support for assistance.

How to Set Greenwave C4000LG to Bridge Mode

Here’s how to set the Greenwave C4000LG DSL Modem to bridge mode:

  1. Log in to the modem’s web interface. Open a web browser and type “http://192.168.1.1” into the address bar. This will bring up the Greenwave setup wizard. Enter the username and password to log in. If you haven’t changed the default login credentials, the username is “admin” and the password is “password”.
  2. Go to the Advanced Settings section. Once logged in, click on the “Advanced” tab and select “Advanced Setup”.
  3. Choose the “Bridge Mode” option. In the “Advanced Setup” section, select the “Bridge Mode” option.
  4. Configure the bridge mode settings. In the “Bridge Mode” section, configure the settings as needed. You may need to enter information such as the IP address, subnet mask, and gateway information.
  5. Save the changes. Once you have configured the bridge mode settings, click on the “Apply” or “Save” button to apply the changes.
  6. Disconnect your computer from the modem. After saving the changes, disconnect your computer from the modem and connect it to your new router.
  7. Log in to the new router and configure it. Log in to the web interface of your new router and configure it to work with your internet connection. You may need to enter information such as the IP address, subnet mask, and gateway information.

Note: If you have any trouble setting your modem to bridge mode or configuring your new router, contact Greenwave customer support for assistance. They can help you troubleshoot any issues and ensure your modem is properly configured for your internet connection.

Greenwave C4000LG Ports

Greenwave C4000LG Ports

Did we answer all your questions about the CenturyLink Greenwave C4000LG DSL Modem? Let us know in the comments, or leave your own questions for our technicians to answer!

Leave a Reply

Your email address will not be published. Required fields are marked *