One of Logitech’s more affordable work-from-home webcams, the C260 features high quality video and audio and is extremely easy to set up. If your computer runs Windows 10, it’s likely that you will be able to plug in your webcam and be able to use it right away without needing a disk or going through a setup wizard.

How to Install Logitech C260 Webcam

Installing a Logitech C260 webcam is a relatively straightforward process. Here are the steps to follow:

  1. Make sure that you have the necessary equipment: You will need a computer with an available USB port, as well as the Logitech C260 webcam and any necessary mounting hardware or accessories.
  2. Connect the webcam to your computer: Plug the webcam into an available USB port on your computer. The webcam should be recognized by the operating system and begin installing any necessary drivers automatically.
  3. Install the webcam software: If necessary, the webcam software should automatically begin installing when you connect the webcam to your computer. If it does not, you can usually find the software on the included CD or by downloading it from the Logitech website. Follow the prompts to install the software.
  4. Configure the webcam settings: Once the webcam is installed, you may need to adjust the settings to your liking. This can usually be done through the webcam software or through the operating system’s control panel.
  5. Test the webcam: Once the webcam is installed and configured, you can test it by launching the webcam software and using the webcam to capture a video or take a picture. Make sure that the image is clear and that the webcam is functioning properly.

By following these steps, you should be able to install and set up your Logitech C260 webcam quickly and easily. If you encounter any issues or have any questions, you can refer to the product manual or contact Logitech customer support for assistance.

Logitech C260 FAQ / Troubleshooting

How to install UVC drivers

Here’s how to install native UVC drivers for your Logitech webcam:

  1. Open Device Manager.
  2. Expand Imaging devices.
  3. Locate the name of your Logitech camera in the list and right-click on it.
  4. Select Update Driver Software…
  5. Click Browse my computer for driver software.
  6. Click Let me pick from a list of device drivers on my computer.
  7. Check Show compatible hardware, and then select USB Video Device.
  8. Click Next and follow the on-screen instructions to update the driver.

Logitech webcam is not working with Microsoft Surface RT

Your Logitech webcam isn’t compatible with Microsoft Surface RT. The UVC video features required for Logitech webcams aren’t available for this platform.

Mac software for UVC cameras

Logitech doesn’t currently make Mac software or drivers for UVC cameras. Your UVC camera works with the UVC drivers included with the Mac OS.

Webcam not detected by computer

If your camera isn’t detected by your computer, please try the following:

  • Try a different USB port on your computer.
  • Make sure the camera isn’t connected to a USB hub or docking station.
  • Make sure you’re using the correct driver for your camera by selecting the Downloads tab on your product’s support page.
  • If your camera is connected to a USB 3.0 port (usually has a blue plastic insert), try using a USB 2.0 port instead.
  • Try connecting the camera to a different computer.NOTE: If your camera isn’t detected by a second computer, it may be defective.

Did we answer all your questions about the Logitech C260 Webcam? Let us know in the comments, or leave your own questions for our technicians to answer!

Leave a Reply

Your email address will not be published. Required fields are marked *