Home Assistant 2026.11: The Marketplace Replaces HACS, What Breaks, and What It Means for Your Network

Home Assistant 2026.11 folds HACS into a built-in Marketplace, changes how entities are named, and tightens remote login; here is what migrates on its own and what to check before you update.

Updated on
Home Assistant 2026.11: The Marketplace Replaces HACS, What Breaks, and What It Means for Your Network

Last updated: November 2026

This guide covers Home Assistant 2026.11, released November 4, 2026, and its first patch, 2026.11.1, released November 9, 2026. It is written for people who run Home Assistant at home on a Home Assistant Green, a Raspberry Pi, a mini PC or a virtual machine, and who use HACS, network device trackers, cameras or remote access. It also covers the Home Assistant Connect AUX-2, the hardware Home Assistant announced on November 11, 2026. Every change below was checked against the official release notes and product page on November 11, 2026.

Key Takeaways

  • HACS is now built into Home Assistant as the Marketplace, found under Settings, then Marketplace. Existing HACS installs migrate automatically the first time Home Assistant starts after the update.
  • Marketplace projects are community code. The release notes state they are "not tested, audited, or supported by the Home Assistant project," so every install deserves the same caution as any other software on your network.
  • The release lists backward-incompatible changes for 45 integrations. The ones that matter most for home networks affect remote login, router-based device trackers, AdGuard Home and Z-Wave.

What is the Home Assistant Marketplace?

The Marketplace is the built-in catalog of community-made integrations, dashboard cards, themes and templates in Home Assistant 2026.11. It replaces HACS and lives under Settings, then Marketplace, with a Browse tab and an Installed tab.

Home Assistant is open-source smart home software that runs on hardware in your home and controls devices over your local network. HACS, the Home Assistant Community Store, was the separate add-on that most people installed to get community integrations. Its founder donated HACS to the Open Home Foundation, and 2026.11 folds it into the core product.

The release notes say the Marketplace "comes with Home Assistant, so there is nothing to set up." You do not need a GitHub account to browse, install or update catalog projects. Adding a custom repository still requires connecting a GitHub account.

What happens to HACS when I update to 2026.11?

Home Assistant migrates HACS to the Marketplace automatically the first time it starts after the update. The release notes say: "If you use HACS today, there is nothing you need to do." Everything you installed stays installed and keeps getting updates.

Item HACS (before 2026.11) Marketplace (2026.11 and later)
Where it lives Separate install with a sidebar entry Built in, under Settings, then Marketplace
GitHub account Required for setup Only needed for custom repositories
Installed projects Managed by HACS Carried over, still updated
Custom repositories Managed by HACS Carried over, added through "Add from link"
Updates HACS update entities Update entities under Settings, then Updates; a restart is still needed
Old bookmarks /hacs Open the Marketplace
New installs of HACS Supported Blocked on 2026.11 and newer

Three details from the HACS project's own migration notes are worth checking after you update:

  • AppDaemon apps and Python scripts that were installed through HACS keep working, but they no longer receive updates. A repair notice lists the ones affected.
  • Dashboard resources are now served from /local/community/. The old /hacsfiles/ paths keep working, and a repair notice reminds you to change any resources configured in YAML.
  • Bugs go to the Home Assistant issue tracker, not the HACS repository.

Make a full backup before you update. Version 2026.11 adds a "Local disk" storage type for backups, so a USB drive that is already formatted can hold a copy that never leaves your home.

Is the Home Assistant Marketplace safe?

The Marketplace is a catalog, not a vetted app store. Home Assistant states that Marketplace projects are "not tested, audited, or supported by the Home Assistant project," and the first-run notice warns that installed items can connect to the internet, share your data or slow Home Assistant down.

You can browse right away, but installing and updating stay locked until you select "I understand the risks and agree." That prompt is accurate. A community integration runs with the same access as Home Assistant itself, which usually means your locks, cameras, presence data and local network.

These habits lower the risk:

  • Read the project page before installing. It shows downloads, GitHub stars and the required Home Assistant version.
  • Install only what you use, and remove projects you have stopped using.
  • Leave the download source on its default, GitHub, unless you have a reason to change it. The release notes warn: "Only pick a download source you trust."
  • Put Home Assistant and your smart home devices on their own network segment. Our guide to VLANs for smart home security shows how.
  • Do not forward Home Assistant's port from your router to the internet. Use a private tunnel for remote access.

What breaks in Home Assistant 2026.11?

Home Assistant 2026.11 lists backward-incompatible changes for 45 integrations. Most homes will notice the new entity naming first. Homes with network-heavy setups should also check remote login, device trackers, AdGuard Home and Z-Wave before updating.

Area What changed in 2026.11 What to check
Entity names Names are now built from the device name plus the entity name. Entity IDs, automations, scripts and dashboards are not changed. Cards without a set name may show a longer name. Set a name on the card or rename the device.
Remote login Non-local addresses, including public addresses and Tailscale addresses in 100.64.0.0/10, must exactly match what Home Assistant sees. A mismatch fails with "Invalid client id." Use one consistent address for remote access.
Device trackers Trackers from FRITZ!Box Tools, UniFi Network, NETGEAR and Nmap Tracker always get a device. New trackers are added disabled. Enable the trackers your presence automations rely on.
AdGuard Home The query log switch needs AdGuard Home v0.107.30 or newer. Setup fails if the server forces HTTPS and the integration was added without SSL. Update AdGuard Home, or remove and re-add the integration with SSL.
Z-Wave Requires zwave-js-server 3.11.0 or newer and Z-Wave JS app 1.9.0 or newer. Update Z-Wave JS before updating Home Assistant.
Ring Deprecated binary sensors, volume sensors and the siren switch are removed. Replace those entities in automations and dashboards.
Old tablets The interface now requires Chrome 67, Safari 15.4 or Firefox 98. Wall-mounted tablets such as the iPad Air 1 and several Fire tablets are affected.

The naming change is the one most people will see. A "Temperature" entity on a device called "Thermostat" now displays as "Thermostat Temperature." Names you set yourself are migrated, and Home Assistant's naming post says names already set on a card "stay exactly as they are."

One security default also changed. The HTTP integration now lets you pick a TLS profile, with Intermediate v6 as the new default and a Modern v6 option that accepts only TLS 1.3. TLS is the encryption that protects an HTTPS connection.

What does 2026.11 add for cameras and local control?

Version 2026.11 adds support for Matter 1.5 cameras, with live video sent directly from the camera to your browser over WebRTC, plus snapshots and a privacy mode state. Matter is the smart home standard that lets devices from different brands work together over your local network.

Matter cameras need a Matter server recent enough to support them. Two-way audio arrives as a preview feature under Settings, then System, then Labs, then Two-way audio. In this release it works only with Matter cameras and Reolink cameras, Reolink cameras must use RTSP, and it works only over HTTPS.

Local camera support matters because it removes the cloud account from the path between your camera and your screen. Our Ring privacy guide covers what cloud-dependent cameras share, and our camera exposure check shows how to confirm yours is not reachable from the internet.

The release also tightens AI access. The built-in MCP server can now expose read-only tools, and the release notes advise giving an AI assistant "the access you are comfortable with and no more." MCP, the Model Context Protocol, is the standard AI assistants use to connect to tools and data. Our OpenClaw and Home Assistant setup guide covers running a local agent against Home Assistant.

Two radio additions round out the release: LoRaWAN devices through a ChirpStack or The Things Network server, and battery-free Zigbee Green Power devices through the ZHA integration.

What is the Home Assistant Connect AUX-2?

The Home Assistant Connect AUX-2 is a $69 adapter, announced on November 11, 2026 under the title "No device left behind," that connects older wired equipment to Home Assistant. It adds a network audio output for an existing stereo, two RS-232 serial ports for controlling equipment such as AV receivers and TVs, and a USB port for a Connect ZWA-2 Z-Wave antenna.

The purpose is local control for devices that never had an app. Home Assistant's product page suggests one privacy use directly: "Turn off your TV's internet access so it can't phone home, and instead control it with AUX-2." The device runs ESPHome, which is open-source firmware for small smart home devices, with an unlocked bootloader. The FCC authorized it for Nabu Casa, the company behind Home Assistant's hardware, on September 2, 2026.

Specification Home Assistant Connect AUX-2
Price (USD) $69 recommended retail price, before tax
Processor ESP32-S3
Network Ethernet, or WiFi on 2.4 GHz only (802.11b/g/n)
Power USB-C (5 V, 2 A) or Power over Ethernet (802.3af), one source at a time
Audio output Combined optical S/PDIF and 3.5 mm port, 16-bit/48 kHz stereo, TI PCM5122 DAC
Serial ports Two RS-232 ports on 3.5 mm connectors; RS-485 needs a separate USB adapter
USB-A port Connect ZWA-2 or an RS-485 adapter
Bluetooth Bluetooth 5 LE for smart home devices, not for audio
Size and weight 106 x 63 x 25 mm, 104 g
Requires Home Assistant 2026.9 or later

Power over Ethernet, or PoE, sends power and data over one Ethernet cable, so the AUX-2 can sit wherever a single cable from a PoE switch reaches. Home Assistant's own guidance favors the cable: "Wired is recommended for the most reliable link."

The limits are specific. The AUX-2 has no audio input, does not play Bluetooth audio, does not amplify speakers, and has no Thread support planned. Serial control works only for devices that have a Home Assistant integration, and cables are not included. Zigbee is possible through ZHA on Home Assistant 2026.11, but Home Assistant says "we recommend caution" because the setup has not been widely tested.

Home Assistant lists Ameridroid, CloudFree and Apollo Automation as sellers and notes that stock may be limited at launch.

How should Home Assistant be set up on a home network?

Home Assistant belongs on a wired Ethernet connection with a reserved IP address, on a network segment separate from your computers and phones, with no ports forwarded from the internet. That layout limits what a compromised device or a bad Marketplace project can reach.

A reserved IP address is an address your router always assigns to the same device. Most ISP rental gateways do not offer network segments, so this layout usually requires a router you own, or the gateway placed in bridge mode in front of your own router. Our bridge mode guide covers Xfinity, Spectrum, Cox, AT&T, Fios and CenturyLink gateways.

For hardware, the Home Assistant Green is the official plug-in hub, and the Home Assistant Connect ZBT-2 adds a Zigbee or Thread radio to any Home Assistant system.

One more monthly fee to kill

Renting your modem? That's $120+ a year.

Own it instead. It pays for itself in months. 90-day warranty and 30-day returns.

Pick your provider:

FAQ

Where did HACS go in Home Assistant 2026.11?

HACS became the Marketplace, found under Settings, then Marketplace. The HACS sidebar entry is gone, and old bookmarks to /hacs open the Marketplace.

Do I need to reinstall my HACS integrations after updating?

No. Everything downloaded with HACS stays installed and keeps getting updates. Custom repositories and update entities carry over with their names, areas and labels.

Do I need a GitHub account to use the Marketplace?

No, not for the catalog. You can browse, install and update catalog projects without one. Adding a custom repository requires a GitHub sign-in, which the release notes say "only reads public information."

Can I still install HACS on Home Assistant 2026.11?

No. The HACS project says HACS "can't be installed on Home Assistant 2026.11 or newer," because Home Assistant blocks the custom integration now that the Marketplace replaces it.

Will the entity naming change break my automations?

No. Entity IDs, automations, scripts, scenes and dashboards keep working because they refer to entity IDs and not to names. Only the names shown on screen can change.

Does Home Assistant check what is in the Marketplace?

No. The release notes say Marketplace projects are "not tested, audited, or supported by the Home Assistant project." The catalog is the same community catalog HACS used.

Does two-way camera audio work without HTTPS?

No. Browsers allow microphone access only over a secure connection, so two-way audio in 2026.11 works over HTTPS only.

How much does the Home Assistant Connect AUX-2 cost?

The Connect AUX-2 has a recommended retail price of $69 in the United States, before tax. It requires Home Assistant 2026.9 or later.

Does the Connect AUX-2 work over WiFi?

Yes, on 2.4 GHz WiFi only. It also connects by Ethernet, and Home Assistant recommends the wired connection.

What is the latest version of Home Assistant 2026.11?

Version 2026.11.1, released November 9, 2026, is the latest patch as of November 11, 2026. It includes fixes for the Marketplace, ONVIF cameras and the TP-Link Omada integration.

USA-Based Modem & Router Technical Support Expert

Our entirely USA-based team of technicians each have over a decade of experience in assisting with installing modems and routers. We are so excited that you chose us to help you stop paying equipment rental fees to the mega-corporations that supply us with internet service.

Updated on

Leave a comment

Please note, comments need to be approved before they are published.