Last updated: November 15, 2026
This article is for cable internet customers of Spectrum, Xfinity and the former Cox, and for anyone who has noticed a neighbor or a nearby city getting much faster upload speeds on the same provider. It covers what Ookla's November 2026 study of cable upload speeds found, what the "mid-split" and "high-split" upgrades behind those numbers are, how to tell whether your area has been upgraded, and why an upgraded area does not always mean a faster upload at your house. Figures were checked on November 15, 2026 against trade press coverage of the Ookla study and Xfinity's support documentation.
Key Takeaways
- In Spectrum's high-split cities, median upload speed rose about eleven-fold to roughly 224 Mbps, according to Ookla Speedtest data reported by Light Reading on November 10, 2026. On cable networks that have not been upgraded, upload speeds "barely moved."
- The upgrade is far from finished. As of the second quarter of 2026, upgraded upload speeds showed up in 13 percent of the Charter (Spectrum) cities Ookla analyzed, 32 percent of Comcast (Xfinity) cities and 77 percent of Cox cities.
- An upgraded network is one of three requirements. You also need a plan tier that includes the faster upload and a modem or gateway certified for it. Xfinity says only a limited number of retail modems qualify.
What did the Ookla study find about cable upload speeds?
Ookla found that cable upload speeds have risen sharply in cities where the provider has rebuilt its network to carry more upstream traffic, and have stayed flat where it has not. In Spectrum's high-split markets, "median upload speed rose about eleven-fold, to about 223.60 Mbit/s," Light Reading reported.
The study used Ookla's Speedtest data, city by city, from the second quarters of 2024, 2025 and 2026. Broadband Breakfast reported that it covered cable providers in "over 50 cities in the U.S. and 30 in Canada." According to that report, cities with the smaller mid-split upgrade saw uploads "roughly 1.5 to 3 times faster," and upload speeds on legacy networks "barely moved."
The share of cities showing the upgrade varies widely by provider. These are the figures for the second quarter of 2026 as reported by Light Reading.
| Provider | Share of analyzed cities showing upgraded upload speeds (Q2 2026) | Main upgrade type |
|---|---|---|
| Charter (Spectrum) | 13 percent | Mostly high-split |
| Comcast (Xfinity) | 32 percent | Mostly mid-split, with some PON |
| Cox (now part of Charter) | 77 percent | Mid-split, a few high-split, some PON |
PON stands for passive optical network, which is fiber run all the way to the home in place of coaxial cable.
Two cautions apply to these numbers. First, they measure what customers experienced, which depends on what customers bought. Light Reading notes that the median "is based on adoption of faster speed tiers rather than baseline network deployment," and Broadband Breakfast reports that Ookla counted a city "once most customers were upgraded to a faster plan." A city can have upgraded cable in the ground and not appear in the count yet. Ookla analyst Kerry Baker put it this way in the Light Reading report: "Consumer adoption naturally follows deployment."
Second, the 13 percent figure sits well below Charter's own schedule. Broadband Breakfast noted that Charter had planned for half of its network to be upgraded by 2026, "yet only 13% of cities show upgrade speeds as of Q2." Those two measures are not the same thing, since one counts network miles and the other counts cities where customers are seeing the speed, but the gap is large.
What are mid-split and high-split?
Mid-split and high-split are two sizes of the same upgrade: the cable company reassigns part of the cable's frequency range from download traffic to upload traffic. More frequency for uploads means faster upload speeds.
A cable line carries downloads and uploads on separate frequency bands, measured in megahertz (MHz). For decades the upload band was a narrow slice at the bottom, which is why a cable plan with a 1 Gbps download often came with an upload of about 35 Mbps. The split is the dividing point between the two bands.
| Network type | Upload frequency band (MHz) | What it means for upload speed |
|---|---|---|
| Low-split (legacy) | 5 to 45 | The original design. Ookla found upload speeds here barely changed from 2024 to 2026. |
| Mid-split | 5 to 85 | Uploads roughly 1.5 to 3 times faster in Ookla's data. Xfinity says its upgraded markets offer uploads of 75 to 200 Mbps. |
| High-split | 5 to 204 | Median upload of about 224 Mbps in Spectrum's high-split cities, about eleven times the earlier figure. |
| Ultra high-split | 5 to 684, and potentially higher | Mentioned by Light Reading as a further option. It is not part of the results above. |
The frequency ranges above are as given by Light Reading. Comcast has mostly chosen mid-split and Charter has mostly chosen high-split, which is why the largest jumps in the study are in Spectrum cities. Our guide to getting faster upload speeds on DOCSIS 3.1 explains the technology in more depth, and our DOCSIS 4.0 explainer covers what comes after it. DOCSIS is the standard cable modems use to carry internet over coaxial cable.
How do I know if my area has been upgraded?
The clearest sign is the upload speed your provider offers at your address. If the plans on offer list an upload speed far above 35 Mbps, the network serving you has been upgraded.
- Check the upload speed on the plan itself. Enter your address on the provider's website and look at the Broadband Facts label on each plan, which lists typical upload speed. Xfinity says upload speeds in its upgraded markets range from 75 to 200 Mbps. Charter has described its upgrade as bringing symmetrical speeds, meaning upload equal to download, so a Spectrum plan at your address that lists matching upload and download speeds points to an upgraded area.
- Run a wired upload test. Connect a computer to the modem or router with an Ethernet cable and run a speed test. Compare the upload result with the upload speed on your plan, and with what a neighbor on the same provider gets.
- Ask the provider directly. Upgrades happen neighborhood by neighborhood, so two streets in the same city can differ. A support agent can see whether the equipment serving your address has been upgraded.
If a test shows your upload is slow against the plan you already pay for, our guide to fixing slow upload speeds covers the causes inside the home.
Why is my upload speed still slow in an upgraded area?
An upgraded network only makes the faster upload available. To receive it, your plan has to include it and your modem has to be certified for it.
- Your plan. The faster upload is attached to specific speed tiers. A customer who has been on the same plan for years may need to move to a current plan to get it. Ask what the upload speed is on your current plan and on the current version of the same tier before paying for a higher one.
- Your modem. A modem built for the old upload band cannot use the wider one. Xfinity's support article says a customer-owned modem "should work for service tier speeds available before the recent upgrade," and that faster speeds need a device "certified to work on our upgraded network."
- Your street. The upgrade may have reached your city and not yet reached the part of the network that serves your address.
One more monthly fee to kill
Renting your modem? That's $120+ a year.
Own it instead. It pays for itself in months. 90-day warranty and 30-day returns.
Pick your provider:
Do I need a new modem to get the faster upload speeds?
Possibly. Light Reading reports that in an upgraded market, "customers might also require a new cable modem or gateway" based on DOCSIS 3.1, DOCSIS 3.1+ or DOCSIS 4.0, depending on the speed tier. Being DOCSIS 3.1 is not enough on its own: the modem also has to be on the provider's list for the upgraded network.
Xfinity
Xfinity keeps a separate list of retail devices certified for the faster uploads, and it is shorter than its general approved list. Xfinity's support article states: "Currently, there are limited retail modems, eMTAs or gateways" that support the faster upload speeds. An eMTA is a modem with a built-in phone line port.
A modem can be approved for Xfinity and still be missing from the upgraded-network list. The Arris S33 is the best-known example. It is a capable DOCSIS 3.1 modem that works on Xfinity's standard tiers and is not certified for the enhanced upload tiers. Our guide to Xfinity modems for faster uploads lists the models that are, and Xfinity's own device lookup is the final word for your address.
There is also a ceiling for owned equipment. Xfinity sells a set of plans it calls X-Class in limited areas, with "equally fast upload and download speeds above 200 Mbps." Its support article says customer-owned modems are "not currently compatible" with X-Class speeds. On those plans, Xfinity's gateway is the only option today.
Spectrum
Spectrum includes a modem with every internet plan at no charge, so the rental question at Spectrum is about the WiFi router and not the modem. For customers who prefer their own modem, the question is whether it is authorized for the upgraded tiers in a high-split area.
We could not confirm that from Spectrum directly. Spectrum's authorized modem page did not load for us without signing in, and published reports conflict on whether customer-owned modems are approved for Spectrum's symmetrical tiers. Before buying a modem for a high-split Spectrum plan, check the model against Spectrum's authorized modem list for your address, or ask Spectrum to confirm it in writing. Our Spectrum modems by speed tier guide covers the standard plans.
Former Cox customers
Cox had the highest share of upgraded cities in Ookla's data, at 77 percent. Cox is now part of Charter, and plans and equipment rules in former Cox areas are changing as Spectrum takes over. Our Cox to Spectrum modem compatibility guide tracks which modems carry over.
Why do upload speeds matter more than they used to?
Households are sending more data than before. OpenVault's Broadband Insights report for the second quarter of 2026, as cited by Light Reading, found that upstream data usage "averaged 58.2 gigabytes per month, up 19.2% year-over-year."
Upload speed is what a video call, a cloud backup, a security camera feed or a large file transfer uses to send data out of the house. On a 35 Mbps upload, two of those at once can fill the connection. That is the gap fiber providers have used against cable for years, since fiber plans typically offer the same speed in both directions. The study's finding for consumers is that cable can close much of that gap where the upgrade is done, and that in most cities it is not done yet.
FAQ
What is a high-split cable network?
A high-split network is a cable system that assigns the frequency band from 5 to 204 MHz to uploads, compared with roughly 5 to 45 MHz on a legacy system. The wider band lets the provider offer much faster upload speeds over the same coaxial cable.
How fast are uploads on Spectrum's high-split network?
The median upload speed in Spectrum's high-split markets was about 224 Mbps, according to Ookla Speedtest data reported by Light Reading. That is a median across customers and plans. Your speed depends on the plan you have.
Is Xfinity mid-split or high-split?
Mostly mid-split. Light Reading reports that 32 percent of the Comcast cities Ookla analyzed showed upgraded upload speeds as of the second quarter of 2026, mostly through mid-split with some fiber. Xfinity says uploads in its upgraded markets range from 75 to 200 Mbps.
Will my current modem work after my area is upgraded?
Yes, at the speeds you had before. Xfinity says a customer-owned modem "should work for service tier speeds available before the recent upgrade." Getting the faster upload requires a modem certified for the upgraded network.
Why did my upload speed suddenly increase?
The most likely reason is that your provider finished a mid-split or high-split upgrade in your area and your plan and modem both qualified for the new speeds. Providers do not always announce these changes street by street.
Does the Arris S33 get Xfinity's faster upload speeds?
No. The S33 is approved for Xfinity's standard speed tiers and is not on Xfinity's list of devices certified for the enhanced upload tiers.
Sources and how this article was reported
Ookla's report could not be read directly, so every figure attributed to Ookla in this article is as reported by Light Reading on November 10, 2026 and Broadband Breakfast on November 9, 2026. Both are trade publications that cover the broadband industry. Ookla sells network data and analysis to internet providers. The OpenVault figure is as cited by Light Reading. Xfinity equipment statements come from Xfinity's support article, last modified August 30, 2026. Spectrum's authorized modem page could not be read. We did not contact Comcast, Charter or Ookla for comment. ModemGuides sells refurbished modems and routers compatible with Xfinity, Spectrum and Cox.
- Light Reading, November 10, 2026: Upstream speeds accelerate where cable has done the 'splits'
- Broadband Breakfast, November 9, 2026: Ookla Reports Improved Cable Speeds in North America
- Ookla: cable providers improve uplink speeds (the original report)
- Xfinity support: Devices certified for enhanced speeds required in recently upgraded areas
- Spectrum: internet plans page

