Logging into your router opens the admin page where you change your WiFi password, update firmware, set up parental controls, enable bridge mode, and fix connection problems. Whether you just unboxed a new router or need to get into one that has been running for years, router login works the same way on almost every brand: connect to the network, type the router's IP address into your browser, and sign in with the admin username and password.
This guide covers the three-step login process, the router login IP addresses and default passwords for every major brand, ISP gateway logins for Xfinity, Spectrum, Cox, AT&T, and Verizon, and what to do when the login page will not load.
Key Takeaways
- Most routers use 192.168.1.1 or 192.168.0.1 as the router login address. Type it into the browser's address bar, not the search bar, while connected to the router's network.
- The default router login is usually admin/admin or admin/password, and the exact credentials are printed on the label on the bottom or back of the router.
- Netgear routers use routerlogin.net, TP-Link uses tplinkwifi.net, ASUS uses router.asus.com, and Linksys uses myrouter.local. eero and Google Nest WiFi have no web login and use their apps instead.
- Xfinity gateways now require you to allow Admin Tool access in the Xfinity app before 10.0.0.1 will load.
- If you are locked out, holding the Reset button for 10 to 15 seconds restores the default login, but it also erases your WiFi name, password, and settings.
ModemGuides.com may earn a small commission from affiliate links in this article. This does not affect our editorial recommendations.
Router Login in 30 Seconds
If you only need the short version, here is the whole process:
- Connect your computer or phone to the router's WiFi, or plug in an Ethernet cable.
- Open a browser and type 192.168.1.1 (or 192.168.0.1) into the address bar, then press Enter.
- Enter the admin username and password from the label on the router. If you never changed them, try admin/admin or admin/password.
If that did not work, the rest of this article covers the brand-specific addresses, ISP gateways, and the fixes for a login page that will not load.
Jump to: General steps | Router login IP addresses | Default router login | Find your router IP | Login by brand | ISP gateways | Troubleshooting | Factory reset | After you log in | FAQ
How to Log Into Any Router: General Steps
Regardless of brand, router login follows the same pattern. You need to be on the router's network, open a web browser, and go to the router's local IP address. The admin page is hosted on the router itself, so this works even when your internet service is down.
Step 1: Connect to the Router's Network
Your computer, phone, or tablet must be connected to the router, either over WiFi or with an Ethernet cable plugged into one of the LAN ports on the back. A wired connection is the most reliable option during initial setup or troubleshooting, because the WiFi may not be configured yet or may drop when you change settings.
Step 2: Type the Router IP Address Into Your Browser
Open Chrome, Firefox, Edge, or Safari. In the address bar at the top of the window, type the router's IP address and press Enter. For most routers that is 192.168.1.1 or 192.168.0.1. Many brands also accept a friendly URL such as routerlogin.net (Netgear) or tplinkwifi.net (TP-Link).
Important: Type the address into the address bar, not a search box. If it lands in Google or Bing, you get search results instead of the router login page.
Step 3: Enter the Admin Username and Password
A login page appears asking for a username and password. If you never changed them, use the default credentials printed on the label on the bottom or back of the router. Once you sign in, you are on the router admin page, where every setting lives.
If you have never set a custom admin password, do that first. It is separate from your WiFi password and it is the only thing standing between your network settings and anyone who connects to your WiFi.
Router Login IP Addresses by Brand
These are the default router login addresses (the "default gateway") for the major brands. If none of these load, skip down to how to find your router's IP address.
| Router login IP | Brands that use it |
|---|---|
| 192.168.1.1 | Netgear, Linksys, ASUS (older), TP-Link (some), Cisco, Spectrum, Verizon Fios |
| 192.168.0.1 | TP-Link, D-Link, Tenda, Netgear (some), Cox Panoramic |
| 10.0.0.1 | Xfinity xFi gateways |
| 192.168.1.254 | AT&T gateways |
| 192.168.50.1 | Newer ASUS routers |
| 192.168.68.1 | TP-Link Deco mesh systems |
| 192.168.100.1 | Cable modem status pages (Arris, Motorola, Netgear modems) |
One address that is not on the list: 192.168.l.1 with a lowercase L. It is one of the most common mistyped router logins. Every character in the address is a number, so make sure you are typing the digit 1, not the letter l or I.
Default Router Login: Username and Password
The default router login is set at the factory and printed on the label. Credentials are case-sensitive. If none of the defaults work, someone changed the password during setup and you will need that custom password or a factory reset.
| Brand | Login URL | Default username | Default password |
|---|---|---|---|
| Brand: Netgear | URL: routerlogin.net | Username: admin | Password: password |
| Brand: TP-Link | URL: tplinkwifi.net | Username: admin | Password: admin (older) or set at first setup |
| Brand: ASUS | URL: router.asus.com | Username: admin | Password: admin |
| Brand: Linksys | URL: myrouter.local | Username: admin | Password: admin or set at setup |
| Brand: D-Link | URL: 192.168.0.1 | Username: admin | Password: blank |
| Brand: Xfinity | URL: 10.0.0.1 | Username: admin | Password: set in Xfinity app (see below) |
| Brand: eero | URL: eero app only | Username: eero account | Password: eero account |
| Brand: Google Nest WiFi | URL: Google Home app only | Username: Google account | Password: Google account |
The most common defaults across all brands are admin/admin, admin/password, and admin with a blank password. Newer routers from TP-Link, Linksys, and most ISPs make you create a password during the first setup, so there is no factory default to fall back on.
How to Find Your Router's IP Address
If the common addresses do not load, your router is using a different one. Any connected device can tell you the address, listed as the default gateway or router.
- Windows: Press the Windows key, type cmd, press Enter. In Command Prompt type ipconfig and press Enter. The number next to "Default Gateway" is your router login IP.
- Mac: System Settings, WiFi, click Details next to your network, then TCP/IP. The address next to "Router" is the one you want.
- iPhone or iPad: Settings, WiFi, tap the "i" next to your network. Look for "Router."
- Android: Settings, Network & Internet (or Connections), WiFi, tap the gear next to your network. Look for "Gateway" or "Router."
Router Login by Brand
Netgear Router Login (Nighthawk, Orbi)
Login URL: routerlogin.net or 192.168.1.1
Default username: admin
Default password: password
Connect to the Netgear router's WiFi or plug in an Ethernet cable, open a browser, and go to www.routerlogin.net. If that page will not load, type 192.168.1.1 instead; routerlogin.net only works when you are on the Netgear network. Enter admin and password, both lowercase. Orbi mesh systems also answer at orbilogin.com.
The Nighthawk app (or the Orbi app) manages the same settings from your phone using your Netgear account rather than the local admin login. If routerlogin.net redirects you to Netgear's website instead of a login page, you are not connected to the Netgear router, which usually means a phone or laptop is still on another network or a VPN is on.
TP-Link Router Login (Archer, Deco)
Login URL: tplinkwifi.net or 192.168.0.1
Default username: admin
Default password: admin on older models, or the password you created during setup
Connect to the TP-Link network, open a browser, and go to tplinkwifi.net, 192.168.0.1, or 192.168.1.1. Newer TP-Link routers require you to create an admin password the first time you set them up, so there is no default. Older Archer models use admin for both fields.
TP-Link Deco mesh systems use 192.168.68.1 or tplinkdeco.net, and the Deco app handles most day-to-day settings. The Tether app does the same for Archer routers. If your browser shows a "Your connection isn't private" warning on the login page, that is normal for a local device; click Advanced, then Proceed.
ASUS Router Login (RT, ROG, ZenWiFi)
Login URL: router.asus.com or 192.168.1.1
Default username: admin
Default password: admin
Connect to the ASUS network, open a browser, and go to router.asus.com or 192.168.1.1. Many newer ASUS models use 192.168.50.1 instead; the label on the bottom of the router shows which. The ASUS Router app covers setup and management from your phone. One quirk: if you close the browser without logging out, ASUS routers block a second login from another device for a few minutes until the first session times out.
Linksys Router Login (Velop, Classic)
Login URL: myrouter.local or 192.168.1.1
Default username: admin
Default password: admin, or the password you set during setup
Linksys recommends an Ethernet connection for the most reliable login. Go to myrouter.local or 192.168.1.1 and enter your admin credentials. Some Linksys routers ask for a recovery key that is printed on the label. Velop mesh systems are easiest to manage through the Linksys app.
eero Login
Login method: eero app only
eero has no web-based admin page and no IP address to type in. Everything, from setup to changing your WiFi password to parental controls, runs through the eero app on iOS or Android. Sign in with your eero account email and password.
Google Nest WiFi Login
Login method: Google Home app only
Google Nest WiFi and Google WiFi are managed entirely in the Google Home app. Open the app, tap your WiFi device, then Settings to reach the network name, password, connected devices, and firmware options. If you still have the older Google WiFi app, it also works: Settings tab, Network & general, Network, then your WiFi points.
ISP Gateway Login: Xfinity, Spectrum, Cox, AT&T, Verizon
If you rent a combined modem and router (a gateway) from your internet provider, the login is a little different from a retail router. Most providers push you toward their app for everyday settings and hide the local admin page behind an extra step.
Xfinity Gateway Login (10.0.0.1)
Login URL: 10.0.0.1
Default username: admin
Default password: the password you set when enabling Admin Tool access
Since early 2026, Comcast turns the 10.0.0.1 Admin Tool off by default. If you go to 10.0.0.1 and see a message telling you to use the Xfinity app, you need to allow access first:
- Open the Xfinity app and go to the WiFi tab.
- Select View WiFi equipment, then Advanced settings.
- Select Admin Tool online access and switch the toggle to Allow.
- Tap Save. The first time you do this, you will set a new admin password.
After that, 10.0.0.1 loads normally while you are connected to your home WiFi. Sign in with admin and the password you just created. If you enabled Admin Tool access before February 2026, the original password on the gateway sticker still works. Most everyday changes (WiFi name, password, connected devices, parental controls) are meant to be done in the Xfinity app; the local admin page is mainly for bridge mode and advanced settings.
If your gateway is in bridge mode, the WiFi is off, so connect a computer directly to the gateway with an Ethernet cable to reach 10.0.0.1.
Spectrum Router Login
Login URL: 192.168.1.1 (some models use 192.168.0.1)
Default username: admin
Default password: printed on the router label
Spectrum's own WiFi routers use 192.168.1.1 with the login printed on the sticker, but Spectrum steers most settings through the My Spectrum app, which handles WiFi name, password, and connected devices without the local page.
Cox Panoramic WiFi Login
Login URL: 192.168.0.1
Default username: admin
Default password: printed on the gateway label (often "password")
Cox's Panoramic gateways answer at 192.168.0.1. The Cox Panoramic WiFi app covers the usual settings and is the route Cox support will point you to.
AT&T Gateway Login
Login URL: 192.168.1.254
Default username: none
Default password: the Device Access Code on the gateway label
AT&T gateways do not use a username. The 12-digit Device Access Code printed on the side or bottom of the gateway is the password. AT&T Smart Home Manager is the app alternative.
Verizon Fios Router Login
Login URL: 192.168.1.1 or mynetworksettings.com
Default username: admin
Default password: printed on the router label
Fios routers use admin and the password from the sticker. The My Fios app manages the same settings from your phone.
One more monthly fee to kill
Renting your modem? That's $120+ a year.
Own it instead. It pays for itself in months. 90-day warranty and 30-day returns.
Pick your provider:
Troubleshooting: Cannot Access the Router Login Page
When router login fails, it is almost always one of two problems: the page will not load at all, or the page loads but rejects the username and password.
The Router Login Page Will Not Load
- Confirm you are on the router's network. The admin page is only reachable from devices connected to that router. A phone that silently switched to cellular, or a laptop on a neighbor's WiFi, will never find it.
- Verify the IP address. Use ipconfig (Windows) or your network details (Mac, iPhone, Android) to confirm the default gateway, then type exactly that.
- Check for typos. No "www" in front of an IP address, and every character is a digit. 192.168.l.1 and 192.168.1.l will not work.
- Turn off your VPN or proxy. VPNs route traffic away from your local network and block addresses like 192.168.1.1 and 10.0.0.1.
- Try another browser or a private window. Extensions and cached pages can interfere. If the page shows a privacy warning, click Advanced and proceed.
- Use an Ethernet cable. A wired connection removes WiFi from the equation.
- Check for a second router. If you have your own router plugged into an ISP gateway, typing the gateway's address from behind your router lands on your router, not the gateway. Connect directly to the device you want to log into.
- Restart the router. Unplug it, wait 30 seconds, plug it back in, and give it 1 to 2 minutes to boot.
The Username or Password Is Not Working
- Read the label. Defaults are printed on the bottom or back of the router and are case-sensitive.
- Try the common defaults. admin/admin, admin/password, or admin with the password field blank.
- Remember the WiFi password is not the admin password. They are two different things. The WiFi password gets you onto the network; the admin password gets you into the settings.
- Check whether it was changed. Many routers force a custom admin password during setup. If you or whoever set up the router chose one, the factory default no longer works, and a factory reset is the only way back in.
How to Factory Reset Your Router
A factory reset restores the default router login, but it also wipes every custom setting: your WiFi name and password, port forwards, parental controls, and any ISP-specific configuration. Treat it as a last resort.
- With the router powered on, find the small recessed Reset button on the back or bottom.
- Press and hold it with a paperclip or pen tip for 10 to 15 seconds, until the lights flash or all go out.
- Release and wait 1 to 2 minutes for the router to reboot.
- Connect to the default WiFi network printed on the label and log in with the default credentials.
After the reset, you are back at first-time setup. Set a new admin password before anything else, then rebuild your WiFi name and password.
What to Do After You Log Into Your Router
Once you are on the router admin page, a few settings are worth checking every time. For a deeper walkthrough of where each setting lives, see our guide to accessing and changing router settings.
Change the Default Admin Password
This is the most important step. The admin password controls who can change your network settings, and factory defaults are public knowledge. Look under System, Administration, or Management and pick something long and unique.
Change Your WiFi Name and Password
If you are still using the network name and password from the label, change them. Use a WiFi password of at least 12 characters and WPA2 or WPA3 security. Never use WEP or an open network. This lives under Wireless or WiFi Settings.
Update the Firmware
Firmware updates patch security holes and often fix speed and stability problems. Check under Firmware Update or Administration, and turn on automatic updates if the router offers them.
Set Up a Guest Network
A guest network gives visitors WiFi without exposing your computers, printers, and smart home devices. Enable it under Wireless, give it its own name and password, and leave client isolation on.
Review Connected Devices
The admin page lists every device on your network. If something unfamiliar shows up, change the WiFi password immediately; every device will need to reconnect, which kicks off anything that should not be there.
Configure Parental Controls
Most routers can block sites, filter content, and set schedules per device under Parental Controls, Access Control, or Security. On eero, Google Nest, Deco, and ISP gateways, these live in the app.
If you logged in hoping to fix slow WiFi or dead zones and the settings did not help, the router itself is often the limit. A router from several years ago cannot keep up with a gigabit plan or a house full of devices no matter how it is configured.
Fix it, don't live with it
WiFi acting up? The right gear fixes it.
Tested refurbished gear. 90-day warranty and 30-day returns.
What's your WiFi problem?
Frequently Asked Questions
What is the router login address?
The router login address is the router's local IP address, usually 192.168.1.1 or 192.168.0.1. Xfinity gateways use 10.0.0.1 and AT&T gateways use 192.168.1.254. Type it into the browser's address bar while connected to the router's network, and the login page appears.
What is the default username and password for my router?
The most common default router login is admin/admin or admin/password, but the exact credentials are printed on the label on the bottom or back of the router. Newer TP-Link, Linksys, and ISP routers make you create a password during setup, so those have no factory default.
Why does routerlogin.net not work?
routerlogin.net only works while you are connected to a Netgear router. If you are on a different network, on a VPN, or plugged into an ISP gateway, it will fail or redirect to Netgear's website. Try 192.168.1.1 instead, and confirm your device is actually on the Netgear WiFi.
How do I log into my router from my phone?
Connect the phone to the router's WiFi, open any browser, and type the router IP address into the address bar. Most brands also offer an app: Nighthawk (Netgear), Tether or Deco (TP-Link), ASUS Router, Linksys, eero, Google Home, Xfinity, My Spectrum, Cox Panoramic, Smart Home Manager (AT&T), and My Fios.
Why can I not access my router admin page?
The usual causes are being on the wrong network, a VPN blocking local addresses, a typo in the IP address, a browser privacy warning that needs to be clicked through, or trying to reach an ISP gateway from behind your own router. On Xfinity gateways, the admin page also stays off until you allow it in the Xfinity app.
What do I do if I forgot my router's admin password?
If the defaults on the label do not work, the only way back in is a factory reset: hold the Reset button for 10 to 15 seconds until the lights blink, wait for the reboot, then log in with the default credentials. Everything you configured, including the WiFi name and password, will need to be set up again.
Do I need an internet connection to log into my router?
No. The admin page runs on the router itself. As long as you are connected to the router over WiFi or Ethernet, you can log in and change settings even while your internet service is down.
Is the router login the same as the WiFi password?
No. The WiFi password lets devices join your network. The router login (admin username and password) opens the settings page. Both are printed on the label from the factory, and both should be changed to something unique.
