Last updated: November 2026
This guide is for Home Assistant users who want camera video that never leaves the house, and for anyone weighing a cloud doorbell against a local setup. Home Assistant 2026.11, released November 4, 2026, adds native support for Matter cameras with live video over WebRTC, a two-way talk preview for Matter and Reolink cameras, and the option to store backups and recordings on a local disk. One week later, on November 11, Nabu Casa launched the Home Assistant Connect AUX-2, a $69 box that brings Z-Wave, Bluetooth, serial and audio into the system without a cloud account. Details were checked on November 12, 2026 against the Home Assistant release post, the AUX-2 announcement and Nabu Casa's product documentation. For the Marketplace that replaced HACS in the same release, see our Marketplace guide.
Key Takeaways
- Home Assistant 2026.11 shows Matter 1.5 cameras as standard camera entities with snapshots and live video. Video streams over WebRTC between your browser and the camera, so it does not pass through a vendor's cloud. The camera's privacy mode is reflected in the entity.
- Two-way talk is a Labs preview in 2026.11. It works with Matter cameras and with Reolink cameras connected over RTSP, and it requires HTTPS because browsers only allow microphone access over a secure connection.
- Home Assistant Connect AUX-2 costs $69 and ships worldwide. It runs on PoE or USB-C, connects by Ethernet or WiFi, and provides a Bluetooth proxy, two RS-232 serial ports, an audio output, and a USB port that carries a Connect ZWA-2 Z-Wave adapter to wherever the box sits.
What changed for cameras in Home Assistant 2026.11?
Matter 1.5, published by the Connectivity Standards Alliance in late 2025, added a camera device type to the Matter standard. Home Assistant 2026.11 is the first release to support it. A Matter camera commissioned into Home Assistant appears as a camera entity with a still snapshot and a live stream, and the stream uses WebRTC, the same low-latency protocol video calls use. Matter Alpha's coverage of the beta describes the stream as running from the browser to the camera, not relayed through a cloud server.
Two requirements apply. The camera must be a Matter 1.5 camera, and the Matter server component in Home Assistant must be recent enough to understand the camera device type, which the 2026.11 release post notes. The camera's privacy mode, where the manufacturer offers one, shows up on the entity, so an automation can confirm the lens is covered or disabled.
The first Matter 1.5 camera on the market is the Aqara Camera Hub G350, which Matter Alpha names as the supported model in its coverage of the beta. Other manufacturers have announced Matter cameras, and the list will grow through 2027. [Aqara Camera Hub G350 on Amazon, affiliate link]
For the rest of your cameras, nothing changes: cameras added through RTSP, ONVIF or manufacturer integrations keep working as before, and Frigate remains the local recording and detection layer. Our local storage camera guide lists models with no cloud dependency.
How do I turn on two-way talk?
Two-way talk is a preview feature in Home Assistant Labs, which is where the project ships functions that work but are not finished.
- Update to Home Assistant 2026.11.1 or later. The first patch release shipped November 9, 2026.
- Go to Settings, then System, then Labs, and enable the two-way audio preview.
- Open a camera that supports it. A talk button appears on the camera view for Matter cameras and for Reolink cameras.
- Reolink cameras must be connected using RTSP rather than the other stream protocols Reolink offers. Reolink says powered cameras with a built-in speaker should work; battery models are not covered.
- Access Home Assistant over HTTPS. Browsers only grant microphone access on a secure page, so a plain http:// address will show the button but cannot capture audio. The companion apps are listed as in development for this feature.
If you reach Home Assistant through Nabu Casa's remote access, HTTPS is already in place. If you reach it only on your LAN by IP address, you will need a local certificate or a reverse proxy; our OpenClaw and Home Assistant setup guide walks through a reverse proxy with HTTPS for local use.
How do I store backups and recordings on a local disk?
2026.11 adds local disks as a storage target. Go to Settings, then System, then Storage, choose Add storage, then Local disk. The disk must already be formatted. Once added, it can hold backups, media files or shared files. For a camera setup this is the piece that keeps everything on your property: Matter or RTSP video in, Frigate or Home Assistant recording to a local disk, backups of the configuration to the same disk or a second one.
This is the opposite of the model cloud cameras sell. Ring's new Drone Cam and Rover Cam, announced this month, route video and control through Amazon's cloud and a subscription. Our Ring Drone Cam coverage and our guide to who can access doorbell footage lay out what that trade involves. The Home Assistant path costs more in time and nothing per month.
What is the Home Assistant Connect AUX-2?
Nabu Casa, the company that funds Home Assistant development, announced the Home Assistant Connect AUX-2 on November 11, 2026 under the heading "No device left behind." It is a small network-attached box, available worldwide for $69 or 59 euros, that gives Home Assistant a physical presence in a room away from the server. What it carries:
- Bluetooth proxy. A Bluetooth radio with an optimized antenna that relays nearby Bluetooth devices to Home Assistant. The announcement says it needs no flashing or configuration. The stated use is replacing a cloud-connected Bluetooth hub from a sensor or lock vendor.
- Z-Wave and Zigbee over the network. A USB port passes a Connect ZWA-2 Z-Wave adapter or a Connect ZBT-2 Zigbee adapter through to Home Assistant, so the radio can sit in the middle of the house instead of next to the server. Zigbee works but is not yet advertised; Thread is not supported over the network.
- Serial control. Two RS-232 ports on 3.5 mm connectors with RX/TX swap switches, for projectors, AV receivers, older TVs and other equipment that takes serial commands. RS-485 Modbus works through a USB adapter that Nabu Casa prices at about $15.
- Audio output. A combined analog and digital audio jack, an optical digital input and a built-in DAC. It works with Music Assistant and the Sendspin protocol, which turns an old amplifier or powered speakers into a local streaming endpoint.
- Power and network. Power over Ethernet or USB-C, with Ethernet or WiFi for the connection. A Grove port accepts GPIO and I2C sensors, the firmware is unlocked, and the case opens with screws.
The announcement is blunt about the purpose: "pull it off some hellish proprietary cloud and back under your control," and, on connected TVs, "Skip that TV spyware, block it from the internet." The serial ports are the part most relevant to that advice. A TV or receiver controlled over RS-232 can be cut off from the internet entirely and still respond to Home Assistant.
The AUX-2 complements the Connect ZWA-2 and ZBT-2 adapters rather than replacing them; the radios still come from those adapters. It is a sibling to the Connect ZWA-2's existing option to run over WiFi or PoE, and it extends the same idea to Bluetooth, serial and audio. No ship dates beyond "available today" were given.
Which setup does a local-first camera system need?
A practical order of operations for someone starting from a cloud camera system:
- Run Home Assistant on hardware you own: a Home Assistant Green or Yellow, a mini PC, or a Raspberry Pi 5 with an SSD.
- Put cameras on their own network segment so they cannot reach the internet or your laptops. Our VLAN guide covers the router side.
- Prefer PoE cameras with RTSP, or Matter 1.5 cameras as they arrive. Both work with 2026.11 without a vendor account.
- Add a local disk under Settings, System, Storage for recordings and backups, and run Frigate if you want object detection.
- Reach the dashboard over HTTPS, through Nabu Casa remote access or your own reverse proxy, so two-way talk and the companion apps work.
- Add a Connect AUX-2 in rooms where Bluetooth locks or sensors live, or where a serial-controlled TV should be taken off the internet.
FAQ
Does Home Assistant 2026.11 support Matter cameras?
Yes. Matter 1.5 cameras appear as camera entities with snapshots and live WebRTC video. The Matter server component must be recent enough to recognize the camera device type.
Does Matter camera video go through the cloud?
Not according to the release coverage. The live stream uses WebRTC between the browser and the camera, with no vendor cloud in the path. Whether the camera itself also uploads to a manufacturer's service depends on the camera's own settings.
Which cameras support two-way talk in Home Assistant?
Matter cameras and Reolink cameras connected over RTSP, with the Labs preview enabled and Home Assistant reached over HTTPS. Reolink says powered models with a speaker should work.
How much does the Home Assistant Connect AUX-2 cost?
$69 in the United States, 59 euros in Europe, available worldwide from November 11, 2026.
Does the AUX-2 replace the Connect ZWA-2?
No. The ZWA-2 provides the Z-Wave radio; the AUX-2 carries it over the network so it can sit anywhere with power and Ethernet or WiFi. The AUX-2 adds Bluetooth, serial and audio on its own.
Can I store Home Assistant backups on a USB drive now?
Yes. 2026.11 adds local disks as a storage target under Settings, System, Storage. The disk must be formatted before it is added.
Sources and how this article was reported
Feature descriptions come from the Home Assistant 2026.11 release post and the Connect AUX-2 announcement, read on November 12, 2026. The detail that WebRTC video runs directly between browser and camera comes from Matter Alpha's coverage of the 2026.11 beta; Matter Alpha's page carries affiliate links. We did not contact Nabu Casa. ModemGuides sells refurbished networking equipment and earns a commission on Amazon links.

