Starlink Router Mini: Compact WiFi 6 Mesh Node

The Starlink Router Mini is a pocket-size dual-band WiFi 6 router that extends a Starlink network into rooms the main router misses. It is about the size of a phone, weighs 0.26 pounds, and pairs in the Starlink app. It works with Starlink service only, and it is the small, low-cost way to fix a dead spot on a Starlink Mini, Gen 2, or Gen 3 system.

Quick Specs

A Mesh Node for Starlink Dead Spots

Mesh is a set of WiFi units that work together under one network name. The Router Mini joins your existing Starlink network as one of those units and repeats the signal up to another 1,300 square feet. It suits a back bedroom, a garage, a second floor, or the far end of an RV. Starlink recommends no more than three added mesh nodes on one network.

Pair It Over WiFi

1. Place the Router Mini about halfway between the main Starlink router and the area that needs coverage, on an open shelf.
2. Plug in the AC adapter and wait a few minutes for it to start.
3. Open the Starlink app and tap Pair when the pairing request appears.
4. If no request appears, open Network, then Nodes, to find it in the pending list.

Or Wire It for a Stronger Link

Starlink recommends a wired connection for the best performance. Run an Ethernet cable (Cat5e or better) from a LAN port on the main Starlink router to the WAN port on the Router Mini, then plug in power. The node appears in the Starlink app on its own. A wired link to a Gen 2 router needs an Ethernet adapter for the Gen 2 router, and a wired link to a Starlink Mini uses Starlink's Mini Ethernet cable.

What It Does Not Do

• It is for indoor use only and has no weather rating.
• It cannot power a Starlink dish, so it cannot take the place of a Gen 3 Router that powers the dish in a Standard 4 X Kit.
• It does not pair with the original Gen 1 Starlink router or with mesh systems from other brands.

Compatibility

• Starlink Mini Kit
• Starlink Standard Kit and the Starlink Gen 3 Router
• Starlink Gen 2 (Standard Actuated) kit and router
• Other Starlink Router Minis

Frequently Asked Questions

Does the Starlink Router Mini work with the Starlink Mini?

Yes. It pairs with the Starlink Mini over WiFi in the Starlink app. For a wired link, use Starlink's Mini Ethernet cable.

How much area does the Router Mini cover?

Starlink rates the Router Mini for up to 1,300 square feet. Walls, floors, and distance from the main router reduce that figure.

Can the Router Mini replace my main Starlink router?

Not on a kit where the router powers the dish, such as the Standard 4 X Kit with its Gen 3 Router. The Router Mini has no power output for a dish, so it is used as an add-on node.

Does the Router Mini work with other mesh systems?

No. It only meshes with Starlink routers. To use a mesh system from another brand with Starlink, see our Starlink mesh and Ethernet adapter guide.

How many Router Minis can I add?

Starlink recommends no more than three added mesh nodes on one network.